12
This is the
Power
key. With the scale off, pressing this key will apply power to the scale and
turn on the display. If the scale is already on, pressing the key will turn it off.
This is the
Lock/Release
key. Press and release this key to cause the weight, height, and BMI
to lock on the current values until the key is pressed again. While the scale display is locked, the
annunciator resembling a padlock will turn on in order to denote that the weight is being held.
This is the
Zero
key. Press and release this key to reset the display to zero. Note that when this
key is pressed with weight on the scale platform, the display will zero the weight up to 100% of
the scale capacity. When the weight is removed, the display will show a negative weight value.
Press the
0
key again to reset the display to zero.
This is the
Enter
key. It serves two purposes. First, during setup, pressing the key will accept
the current displayed setting of the parameter. Second, the key is used to signal completion of
the entry of data (in both setup and operation) and causes the scale to process the data entered.
This is the
BMI
key. It is used to input the user’s height and then to perform the Body Mass
Index (BMI) calculation. Note that the scale will not respond to pressing the key unless the
weight is stable.
Pressing the key once allows the operator to enter the height of the user using the or
keys to increase or decrease to the correct height. After entering the user’s height, pressing it
again will display the Body Mass Index (BMI) calculation. Pressing it a third time, will return the
display to the user’s weight.
•
WARNING:
DO NOT operate the keys with pointed objects (pencils, pens, etc.). Damage to keys resulting
from this practice is NOT covered under warranty.
Keypad Functions
500 lb x 0.2 lb 230 kg x 0.1 kg
