Direct Supply Attendant 6880DS, Руководство пользователя

Страница: 27 / 32

27
1-800-245-9917
Bluetooth Low Energy (BLE)
The Attendant Bluetooth Digital Chair Scale has a wireless transmitter inside the weight
indicator enclosure that can be configured for Bluetooth Low Energy (BLE).
Features Available via BLE
Device Information Service
• Manufacturer Name
• Model Number
• Software Revision
Battery Service
• Battery Level Percentage
Weight Scale Service
• Weight Measurement
• Weight Scale Feature
Enable Bluetooth (BLE) Networking
NOTE:
Default Network Settings are:
y F1
=
OFF
,
bLE
=
OFF
, and
dHCP
=
On
.
To enable Bluetooth (BLE) networking:
1. Press the key to turn the scale on.
2. Press and hold the 0 keys until the display shows the prompt CAP .
3. Press the key until the prompt bLE is displayed.
4. If the bLE selection is set to OFF, use the or keys to change the selection to
On and press the key.
5. Press the key to turn the scale off and then press it again to turn the scale back on.
6. The scale is now ready to pair with a Bluetooth-capable device.
• IMPORTANT! If an attempt is made to turn the Bluetooth (BLE) off when a device is
connected to the scale, the display will show the error message bLE (in the smaller
upper seven-segment display) and E-OFF (in the large lower seven-segment display).
This message will be shown until a key is pressed. Note that at this time, the Bluetooth
(BLE) is still on, only the message has been cleared. In order to turn the Bluetooth
(BLE) off, the device must be disconnected from the scale or the scale must be turned
Off and back On.
Bluetooth Pairing
Bluetooth capability on the Attendant Bluetooth Digital Chair Scale is always active. To
pair a Bluetooth-capable device with the scale, select the name of the scale from the
list of available connections: SCALE-XXXX ##:##:##:##:##:##.
XXXX represents the last four digits of the Attendant Bluetooth Digital Chair Scale
serial number. The serial number of the unit is located on a label between the battery
compartments behind the seat. ##:##:##:##:##:## represents the MAC address of the
BLE wireless transmitter in the scale weight indicator.
When a stable weight reading is achieved, and if the scale is paired with a Bluetooth-
capable device, the reading will transmit when the device sends a request to receive data.