19
1-800-245-9917
(Select Type of Printer Output – If SER1 (Com1 Mode) is set to POLL)
The display will show TYPE and the current setting. If the value displayed is acceptable,
press the key. Otherwise, press the or keys to select a new value and then press
the key to save it and proceed to the next prompt.
Allowable settings are 0 or 1.
0 = Print Ticket 1 = Print Journal Line
(End of Print Line Feeds – If SER1 (Com1 Mode) is set to POLL)
At the end of data sent to a printer, the scale can send a number of carriage return/line
feeds to position the paper in the printer for removal or the next print.
The display will show EOP and the current setting. If the value displayed is acceptable,
press the key. Otherwise, press the or keys to select a new value and then press
the key to save it and proceed to the next prompt.
Allowable values are 0 to 9.
(USB Mode)
The display will show
USb
and the current setting. If the value displayed is acceptable,
press the key. Otherwise, press the or keys to toggle the USB Mode between
PHdC (Personal Healthcare Device Class), Cont (continuous output) or POLL (weight on
demand) and then press the key to save it and proceed to the next prompt.
This setting controls the output for the USB device port. Allowable settings are PHdC,
ALLYn or SnnA.
If PHdC (Personal Healthcare Device Class) was selected for USB, the scale will transmit
data using the CEN ISO/IEEE 11073 Medical / Health Device Communication Standard.
If ALLYn (Welch Allyn) was selected for USB, the scale will automatically transmit data to a
Welch Allyn CVSM Device when the weight on the scale stabilizes and the
(STABLE)
annunciator turns on. (Requires device to have an activated license. Must purchase Detecto
WACONNECT)
If SnnA (SMA, Weight-On-Demand) was selected for USB, and the scale is connected to a
computer for transmission of weight data to a PC-based EMR (electronic medical record)
software program, it will transmit a single set of weight data each time the computer sends
a weight request “ENQ” (hex 05) or a SMA weight request “W”.
(Select Type of SMA Output – If USb (USB Mode) is set to SnnA)
The display will show TYPE and the current setting. If the value displayed is acceptable,
press the key. Otherwise, press the or keys to select a new value and then press
the key to save it and proceed to the next prompt.
Allowable settings are 0 or 1.
0 = Print Ticket 1 = Print Journal Line
EOP
