3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
34
13.7 PROGRESSIVES
13.7.1 PROGRESSIVE DIGITS
Through function
401
, combinable with the desired key (
<< F.KEYS >>
step,
TECH.MAN.REF.
), it’s possible to set the
number of digits with which the TICKET PROGRESSIVE and LOT PROGRESSIVE are printed.
It’s also possible to quickly set the number of progressive digits by entering the corresponding value through the numeric
keys and then pressing the key combined with the function 401.
The number of settable digits varies from 4 to 16, organised in this way:
-
if the actual digits of the total are less than the number of digits set in this step, the difference is filled with some
spaces.
-
if the actual digits are greater than the number of digits set in this step, only the ones actually entered are taken into
consideration (counting from right to left).
The alignment of the total fields is on the left.
NOTE:
The number of settable digits DOES NOT INCLUDE the comma.
13.7.2 TICKET PROGRESSIVE
Through function
402
, combinable with the desired key (
<< F.KEYS >>
step,
TECH.MAN.REF.
), it’s possible to modify or
clear the TICKET PROGRESSIVE (up to 5 digits).
It’s also possible to quickly modify the ticket progressive by entering the corresponding value through the numeric keys and
then pressing the key combined with the function 402.
The TICKET PROGRESSIVE is a progressive number which increments of one UPON THE FIRST TOTALISATION
SUBSEQUENT TO THE CLEARING OF THE PARTIAL TOTAL.
13.7.3 LOT PROGRESSIVE
Through function
403
, combinable with the desired key (
<< F.KEYS >>
step,
TECH.MAN.REF.
), one obtains the clearing of
the AUTOMATIC LOT (up to 6 digits); before carrying out the actual clearing, one is asked to confirm or cancel the
operation; confirm with
ENTER
.
The AUTOMATIC LOT is a progressive number which increments of one UPON THE FIRST TOTALISATION
SUBSEQUENT TO THE CLEARING OF THE GENERAL TOTAL.
14. PRINTOUTS
The instrument is fitted with 13 different print functions, which may be used while weighing, and of 30 print formats, in other
words, 30 different memory storages, each of which contain a programmable printout.
The print executed by 13 of these functions depends on the print format linked to it; see the following section for the
linkages.
The format linking function allows executing various printouts, by changing the linked format each time.
Note
: If the instrument is legal for trade the division of sum will be the sum of all selected scales divisions rounded up.
The available functions are:
SIMPLE PRINTOUT
- Programmable printout -
Through the
F5
key one prints the linked format,
without executing the totalisation.
With the APPROVED instrument:
-
The printing works if there is a POSITIVE NET WEIGHT of at least 20 divisions (in LOADING).
-
The printout is reenabled depending on how the
F.ModE
>>
rEACt
parameter has been programmed in the TECHNICAL
SET-UP
(TECH.MAN.REF.)
.
With the NON APPROVED instrument:
-
The printing works if there is a NET WEIGHT greater than zero (in LOADING).
-
The simple printout does not exclude the totalisation and is always active (the programming of the
F.ModE
>>
rEACt
parameter of the TECHNICAL SET-UP,
TECH.MAN.REF.
, is not taken into consideration).
