3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
16
ir.numb
●
numeric keys
○
function keys
- select the desired key that should be simulated by using the
arrow keys and press the PRINT /
key to confirm
and pass to the following setting;
- the configuration of the numeric key is proposed:
- select the desired functioning of the numeric key (simulating the numbers or simulating the function keys from F1…F10)
by using the
arrow keys
and press the PRINT /
key to confirm and exit the menu.
4.1.6.3 “6-KEY” RADIO REMOTE CONTROL
With this type of remote control, the functioning of each key can be programmed so that it is matched to one of the available
keys of the indicator.
This configuration must be carried out in the Setup environment, in the
<< inF.rEd >>
step
(TECH.MAN.REF.)
, after the
selection of this type of remote control.
By pressing the
./HELP
key of the indicator, it’s possible to see, while weighing, the list of the functions matched to the keys
of the indicator and also to the keys of the remote control (see section “HELP MENU”).
EXAMPLE OF CONFIGURATION
USE OF MORE REMOTE CONTROLS WITH ONLY ONE INDICATOR
If one works with only an indicator, it is possible to use any 6-key remote control, without combining it to the indicator,
therefore without limiting the number of usable remote controls.
To enable this mode one has to first select “RD 6 BR” in the
<< inF.rEd
>>
(TECH.MAN.REF.)
.
USE OF MORE REMOTE CONTROLS WITH SEVERAL INDICATORS IN THE SAME AREA
If one needs to use several indicators in the same area, it is possible to combine each remote control to the desired
indicator, in order to execute the function only on it and therefore avoid emulating the function on all indicators in use.
By enabling this mode it will be possible to combine up to 3 different remote controls (e.i. for 3 different operators) for each
indicator.
To enable this mode one has to first select “RD 6” in the
<< inF.rEd >>
(TECH.MAN.REF.)
.
To link a new remote control to the indicator one has to:
- press at length 1 and 2 keys together (3 seconds).
- the instrument displays "aut.rd?"
- press the ENTER key of the indicator
- the new remote control is linked
To remove the linking of a remote control one has to:
- press at length 1 and 2 keys together (3 seconds).
- the instrument displays "aut.rd?"
- press the C key of the indicator; if the remote control was previously linked, it will be removed.
