3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
26
To display the metric data:
-
Press in sequence the
2ndF
and
C
keys
-
The “METROLOGIC INFORMATION” is displayed
-
the display will show the number of the scale, the type of displayed data and its value.
-
Press the
F6
key to quickly scroll the data frontwards
-
Press the
F7
key to quickly scroll the previous data backwards.
-
Press the
C
key to quickly return to weighing.
10. FILLING IN THE INPUT TEXT
The indicator offers the possibility of using 15 CONFIGURABLE INPUT TEXTS (for example LOT, OPERATOR, SHIFT,
etc.), each made up of 16 heading characters and 32 content characters.
When entered in the TECHNICAL SET-UP (for the configuration of all related parameters, see
F.ModE
>>
tXt >> CFG.tXt
“Input text configuration” step,
TECH.MAN.REF.
), these may be printed later on, if programmed in the printouts; or these
may be used as a reminder.
To manually fill in the input texts it is possible to proceed in two ways:
1)
If one knows the memory storage position
(from 0 to 14) of the text to be modified, type the number, followed by
the
F4
key: now enter the text and confirm with
ENTER
(the indicator returns to the weighing phase).
2)
By pressing for an instant the
F4
key, one accesses the complete list of the texts, for example:
-
The LED display shows “in. XX”, in which XX is the index of the free text (from 0 to 14) when the LCD display
shows THE HEADING on the first line of the input text (or “Empty…” if empty).
-
Use the arrow
keys to select the text to be filled in and press
ENTER
:
now one can enter the alphanumeric
text in the second line of the LCD display, (see chapter “ENTERING ALPHANUMERIC TEXT”); in the first line of
the display the heading of the text is displayed.
-
Press
ENTER
to store and pass on to the following stored TEXT; by confirming the last entered text one returns
automatically to the weigh functioning; it is possible to exit also with the
C
key while in the text selection
modification phase.
NOTE:
The entered texts remain in storage until these are substituted or cancelled.
If no text has been configured, the pressing of the
F4
key has no effect.
Through specific print macros, it’s possible to automatically cancel the contents of all the texts, right after their printing
(TECH.MAN.REF.)
.
For information on the entry of the alphanumeric texts, see section “ENTERING ALPHANUMERIC TEXT”.
QUICK MODIFICATION OF AN INPUT TEXT
It’ s possible to access directly to the modification of each of the input texts from 0 to 9 by associating to a key the
corresponding function from
121
to
130
(see
<< F.kEyS >>
step,
TECH.MAN.REF.
).
Furthermore the external PC keyboard allows to enter a numeric or alphanumeric string (max.32 characters) and then press
the key combined to the desired input text to quickly enter the text without having to confirm with
ENTER
key (see section
“INDICATOR CONNECTED TO PC KEYBOARD”).
QUICK DELETION OF AN INPUT TEXT
By linking the function
131
to a direct key it’s possible to delete the content of an input text: when this key is pressed, one is
asked to enter the number of the text to be deleted (for example, by confirming the value 0, the content of the text 0 is
deleted). By confirming the value 99, the content of all the input texts is deleted.
It’s also possible to link the number of a specific input text to the function
131
(preamble function in the
<< F.KEYS >>
step,
TECH.MAN.REF.
), allowing to directly delete the content of an input text with a direct key, for example
F1
key to quickly
delete the content of the text 0.
