40
Intervals of engine oil changing:
Oil designation
Intervals of oil changing (Operating hours)
L-ECD 15W-40
200
Avoid mixing of different oils.
8.3.2 Transmission
Please refer to the Item 6.1.2, Hydraulic torque converter-transmission
(ZF6WG200)
8.3.3 Rear axle
a. Note:
Check oil level and change oil according to the lubrication chart (8.2).
1. Remove the drain plug (Fig.31/1) and drain oil into a container to assist
draining, unscrewing the screw thread of oil filler (Fig.31/2). Close it only after oil is
drained off;
Fig. 31
2. Clean drain plug (Fig.31/1) and use a new sealing ring to refit and retighten;
3. Fill fresh oil at the oil filter (Fig.31/2) into axles until the middle of the oil
level indicator (Fig.31/3) is reached;
4. Rescrew on screw plug and tighten. Capacity: Approximate 28L, oil level is
required to reach the middle of the oil level indicator.
Fig. 32
b. Check oil level
1. Oil level must be at the middle of oil level indicator (Fig. 31/3).
2. If necessary, add oil at oil filler (Fig. 31/2)
Содержание PY180H
Страница 16: ...12 A3 电气接线图 ...
Страница 39: ...35 A3 润滑图 ...
