Dingsheng Tiangong PY180H, Руководство по эксплуатации

Страница: 20 / 80

16
7. Operation instruction
7.1 Adjust before operating for the first time
Before unloading the grader, must check whether the machine has been damaged
during transportation. If find out damage, shall contact with the transport company or
commercial agent. The extent of damage or stolen extent shall be recorded on the
freight bill. Contact with the saler and report damage condition to them.They will help
you to repair the machine necessarily and handle your claim against Transport
Company.
The following inspection shall be conducted and the check result shall be
recorded:
a) Lighting and horn systems;
b) The oil levels of oil tank, engine, rear axle, rear balancing tank, rotating
impeller box of blade are in accordance with requirement;
c) Fastening condition of nuts;
d) Whether the tyre pressure is in accordance with regulations and requirement;
e) Whether the battery (sulfuric acid level) has been charged fully;
f) Check liquid levels: Engine
Transmission
Rear axle
Tandem box
Blade rotating turbine box
Hydraulic oil tank
After starting the engine: The working brake pressure signal lamp cannot light,
check the function of the brake and steering systems.
After the machine has worked for more than one week: all grease nipples should
be greased according to the lubrication chart and grease shall be filled.
Antifreezing: Antifreezing diesel oil shall be used if necessary.
7.2 Running-in time
It is recommended that all moving elements of the grader shall be run in, during
this period the grader shall not run under full load.
The grader shall not use full power during the first 50h operating time.
Full power can be used within 50h~100h, while the use time cannot be too long.
7.3 Diagrammatic representation of control instrument and operating lever of
complete machine