Dingsheng Tiangong PY180H, Руководство по эксплуатации

Страница: 32 / 80

28
Note:
Before turning the grader and driving it in reverse, the back scarifier shall
be lifted.
7.5.7 Bulldozing plate position indicator
a. Bulldozing plate
The control lever (See 7.5.1) controls the (lifting and lowering of) bulldozing
plate. The bulldozing plate is connected with front frame by high strength bolts to
enable the bulldozing plate mount and remove quickly.
Note:
The connecting elements of the position indicator shall be disconnected
firstly before removing bulldozing plate, the bulldozing plate shall not affect the
working of blade.
b. Bulldozing plate position indicator
Note:
This indicator is mounted on the front-left lamp holder (Fig. 27).
Fig. 27
1. The Pointer (1) on indicator (2) indicates the position of bulldozing plate.
Left mark point- The bulldozing plate if lifted completely.
Middle mark point- The bulldozing plate is close to the ground.
Right mark point- Maximum cutting depth of the bulldozing plate.
7.5.8 Front wheel lean
The control of the front wheel lean is carried out by the use of control lever (See
7.5.1), and the use of the front wheel lean can realize:
--- A small turning radius, increasing sliding force on the tyre, when grading;
--- Good adhesive force even when working on sloping field.
7.6 Driving
7.6.1 Preparation work
a. Check the oil level and fill up if necessary;
b. Check the engine level and fill up if necessary (See 8.3.1. a);