DINGLI JCPT DCS Series, Руководство по обучению

Страница: 10 / 87

培训手册
Training Manual
安全规则
Safety Regulation
JCPT-DCS
www.cndingli.com
1-6
Do not contact adjacent structures with the platform
Do not alter or disable the limit switches.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
没有制造商的书面许可，不要修改或改动高空作业平台。在平台、踢脚板或护栏上安装用于放工具
或其它材料的附加装置会加大平台重量和平台表面积或者加大负载。
不能改变或损坏任何可能影响机器安全性和稳定性的部件。
不能用不同重量或规格的零件更换影响机器稳定性的关键零件。
不能使用重量小于原装蓄电池的蓄电池。蓄电池在底盘中不仅起配重作用，而且对保持机器的稳定
性至关重要。
JCPT0607DCS
的每个蓄电池重量必须达到
25kg
，所有蓄电池的重量必须达到
50kg
。
不能将梯子或脚手架放在平台内，或靠向机器的任何部件。
只能运输分布均匀且可以由平台上的人安全移动的工具和材料。
不能在移动或活动的表面及车辆上使用机器。
确保所有轮胎状况良好且螺母已适当拧紧。
Do not alter or disable machine components that in any way affect safety and stability.
Do not replace items critical to machine stability with items of different weight or specification.
Do not use batteries that weigh less than the original equipment. Batteries are used as
counterweight and are critical to machine stability. Each battery must weigh 25 kg. The batteries
must weigh a minimum of 50kg.
Do not modify or alter an aerial work platform without prior written permission from the
manufacturer. Mounting attachments for holding tools or other materials onto the platform, toe
boards or guard rail system can increase the weight in the platform and the surface area of the
platform or the load.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not transport tools and materials unless they are evenly distributed and can be safely handled
by person(s) in the platform.
Do not use the machine on a moving or mobile surface or vehicle.
Be sure all tires are in good condition, air-filled tires are properly inflated and lug nuts are properly
tightened.
砸压危险（
Crushing Hazard
）
不要将手和胳膊靠近有剪伤、砸压危险的部位。
当折叠栏杆时，手不要放在可能被夹伤的地方。