培训手册
Training Manual
操作
Operation
JCPT- DCS
www.cndingli.com
2-8
○
1
功能启用按钮(
Function enable switch for lift and drive functions
)
起升功能:按住平台控制手柄上的功能启用按钮以启用起升功能。按照蓝色箭头指示的方向移动控
制手柄,平台将升起。按照黄色箭头指示的方向移动控制手柄,平台将下降。当平台下降时,下降
警报应鸣响。
驱动功能:按住平台控制手柄上的功能启用按钮以启用驱动功能。按照控制面板上蓝色箭头指示的
方向移动控制手柄,机器将向蓝色箭头指示的方向移动。按照控制面板上黄色箭头指示的方向移动
控制手柄,机器将向黄色箭头指示的方向移动。
Lift function: Press and hold the function enable switch to enable the lift function on the platform
control handle. Move the control handle in the direction indicated by the blue arrow and the
platform will raise. Move the control handle in the direction indicated by the yellow arrow and the
platform will lower. The descent alarm should sound while the platform is lowering.
Drive function: Press and hold the function enable switch to enable the drive function on the
platform control handle. Move the control handle in the direction indicated by the blue up arrow
on the control panel and the machine will move in the direction that the blue arrow points. Move
the control handle in the direction indicated by the yellow down arrow on the control panel and
the machine will move in the direction that the yellow arrow points.
Press and hold the function enable switch to enable the drive function on the platform control
handle. Move the control handle in the direction indicated by the blue left arrow on the control
panel and the machine will turn to the lift direction that the blue arrow points. Move the control
handle in the direction indicated by the yellow right arrow on the control panel and the machine
will turn to right direction that the yellow arrow points.
○
2
转向指拨按钮(
Thumb rocker switch for steer functions
)
按钮往左按,车轮左转;开关往右按,车轮右转。(
Press the thumb rocker switch in either
direction to activate steer function.
)
○
3
带辅助开关的比例控制起升
/
行走手柄(
Proportional control handle and function enable
switch for lift and drive functions
)
起升功能:选择起升功能选择按钮,持续按住控制手柄上的辅助开关。手柄往前推,平台会起升;
手柄往后推,平台会下降。(
Lift function: Press and hold the function enable switch to enable the
lift function on the platform control handle. Move the control handle in the direction indicated by
the blue arrow and the platform will raise. Move the control handle in the direction indicated by
the yellow arrow and the platform will lower.
)
行走功能:选择行走功能选择按钮,持续按住控制手柄上的辅助开关。手柄往前推,机器会往前
进;手柄往后推,机器会往后退。(
Drive function: Press and hold the function enable switch to
enable the drive function on the platform control handle. Move the control handle in the direction
indicated by the blue arrow on the control panel and the machine will move in the direction that
Содержание JCPT DCS Series
