Dinel ULM - 54, Инструкция по эксплуатации

Страница: 20 / 32

ULM–54 © Dinel, s.r.o. 20
The setting defines the sensitivity of the ULM-54 level meters in three steps:
• "LOW" - reduced sensitivity in case of ambient interference affecting the measurement.
• "MEDIUM" - medium sensitivity (suitable for most applications)
• "HIGH" - increased sensitivity for media partially absorbing the ultrasonic signal (bulk ma -
terials, foam).
Sending a message to the level meter
The type and contents of supported messages depend on the connected device.
Sensitivity setting of the level meter
Preset sensor sensitivity levels are LOW (1), MEDIUM (3), and HIGH (5). To change the sensor
sensitivity, select the appropriate item and confirm it.
• Menu: MESSAGE (ID 068)
• [ ↔] - Movement between characters, [↕] - Character change
008
CONFIGURATION
057
HART
069
BASIC SETUP
068
MESSAGE
• Menu: SENSITIVITY (ID 076)
• [↕] - Sensitivity change
008
CONFIGURATION
069
BASIC SETUP
057
HART
076
SENSITIVITY
059
DINEL DEVICE MENU