19
©
Dinel, s.r.o. ULM–54
Physical units setting of the measured magnitude in the level meter
•
mm – distance in millimetres
•
cm – distance in centimetres
•
m – distance in meters
•
in – distance in inches
•
ft – distance in feet
•
pf - distance in picofarad
• Menu:
UNITS (ID 074)
•
[↕] - Changing the unit
008
CONFIGURATION
069
BASIC SETUP
057
HART
074
UNITS
059
DINEL DEVICE MENU
Averaging setting of the measured magnitude in the level meter
Setting of measurement response rate. It is useful to use the function for the suppression of
fluctuations on the display at fast and jump changes in the level (whirling level). The subsequent
reaction time will depend on the exponential curve. Damping with defined delay in seconds indi
-
cates the time that the exponential curve reaches 2/3 of its maximum value. The value is always
a floating comma number.
• Menu:
DAMPING (ID 075)
• [
↔] - Movement between characters, [↕] - Increase in the value of the marked digit
(at marked decimal point, a shift by one order occurs)
008
CONFIGURATION
069
BASIC SETUP
057
HART
075
DAMPING
059
DINEL DEVICE MENU
Reset of the level meter
This function restarts the measuring device. The option must be confirmed with “YES”.
• Menu:
RESET (ID 083)
• [
↔]
- Change of the YES / NO option
008
CONFIGURATION
070
SERVIS
057
HART
083
RESET
059
DINEL DEVICE MENU
