Dinel CLM-70, Инструкция по эксплуатации

Страница: 10 / 32

CLM–70 © Dinel, s.r.o. 10
E
- electrode length [mm]
t
- guide rod length – approx.
500 mm
p
- compression spring length
– approx. 200 mm
c
- distance from the hopper
axis (choose the minimum
one, if possible)
Anchor welding cylinder
(mat. 11375) or the
dust-tight bushing to the
hopper casing
Fig. 4: Installation of the level meter with a rope electrode and anchor
E – electrode length [mm] –
submerge the electrode
end at least 20 mm below
the lowest measured level.
h – distance from the bottom
(at least 30 mm)
a – distance from the wall (at
least E/20)
Fig. 5: Installation of the level meter with a reference electrode
ROPE ELECTRODE WITH AN ANCHOR
APPLIES TO: CLM-70_-31
AGGRESSIVE LIQUIDS, NON-METAL VESSELS
APPLIES TO: CLM-70N-61