5
©
Dinel, s.r.o. CLM–70
•
CLM–70_–00 Without electrode
; customer makes an electrode himself (types 10
or 30 only) and attaches it to the electrode holder using M8 threaded
connection.
•
CLM–70_–10 Uncoated stainless steel rod electrode
for level measurement of
electrically non-conductive liquids (oils, diesel fuel) and bulk solids (flour,
sand, cement, granulated plastic materials, etc.). Length 0.2 ... 8 m.
•
CLM–70_–11 Coated stainless steel rod electrode (PFA)
with enhanced resistance
to penetration (diffusion) of vapours and gases. For level measurement
of water and other electrically conductive liquids in food processing,
pharmaceutical, and chemical industries. It can be used temporarily for
high-temperature applications (e.g. sanitization with hot steam) or for
volatile aggressive liquids, etc. Length 0.2 ... 3 m.
•
CLM–70_–12 Coated stainless steel rod electrode (FEP)
, suitable for level measure
-
ment of water and other electrically conductive liquids. Also suitable for
impure liquids in metallic tanks, concrete sumps, etc. Length 0.2 ... 3 m.
•
CLM–70_–13 Semi-coated stainless steel rod electrode (FEP)
for level measurement
of electrically non-conductive liquids in environments where partial
condensation of vapours on the electrode may occur. Length 0.5 ... 8 m.
•
CLM–70_–20 Uncoated stainless steel rod electrode
with reference tube for level
measurement of unpolluted and electrically non-conductive liquids (oil,
diesel fuel, petrol). Length 0.2–3 m.
•
CLM–70_–22 Coated stainless steel rod electrode (FEP)
with reference tube for level
measurement of clean electrically conductive liquids (e.g. in plastic and
glass tanks) and for higher measuring accuracy. Length 0.2 ... 3 m.
•
CLM–70_–30 Uncoated stainless steel rope electrode and weight
for level
measurement of bulk solids and powders (sand, flour, cement, etc.). The
rope can also be shortened. Length 1 ... 20 m.
•
CLM–70_–31 Uncoated stainless steel rope electrode and coated dynamic anchor
for measurement of bulk solids in taller silos. Length 1 ... 20 m.
•
CLM–70_–32 Fully coated stainless steel rope electrode and weight (FEP rope
insulation, PTFE weight insulation),
designed for level measurement of
water and other electrically conductive liquids. Length 1 ... 12 m.
•
CLM–70_–61 Two coated stainless steel rod electrodes (FEP electrode insulation,
PTFE head)
for level measurement of aggressive liquids. Length 0.2 ... 2 m.
4 .
V
ariants
of
sensors
3 .
r
ange
of
appliCation
The capacitive level meters are suitable for continuous level measurement of various liquids
and solid materials. The level meters are resistant to any changes in the atmosphere above the
level (vacuum, overpressure, steam, or dust).
Содержание CLM-70
Страница 2: ......
