Digitus DS-15202-1, Руководство пользователя

Страница: 83 / 146

-83-
3a. If you click the Connect Drive button in the Drive Redirection field, the following issues
need to be taken into consideration:
Select the drive to be redirected and click
OK .
Select the drive that should be redirected. All available devices (drive letters) are
shown here. Please be noted that the entire hard disk that the drive belongs to will be
shared with the Remote computer, not only one partition. If you have a hard disk with
more than one partition, all partitions that belong to this disk will be redirected. The
“Refresh” button can be used to regenerate the list of drive initials. This is especially
handy when working with a USB stick.
Write Support
This feature may be enabled here. Write support means that the remote computer is
allowed to write on your local drive. As you can imagine, this is very dangerous. If both
the remote and the local system try to write data on the same device, this will certainly
destroy the file system on the drive. Please use this feature only if you exactly know
what you are doing.
Warning
Please be cautious that if “Allow Write Support” is
selected, all data on the shred media might be destroyed.
Warning
1. Drive Redirection is only possible with Windows 2000 or later versions.
2. The Drive Redirection works on a low SCSI level and the SCSI protocol
cannot recognize partitions; therefore the whole drive selected will be shared
instead of any particular partition.