18
Image Control
5.2.5
This menu allows you to configure the camera settings. Some IP cameras may not support this
feature and the IP camera settings cannot also be changed using the DVR.
Channel:
Select the channel you want to modify.
IR-CUT Mode:
Select the desired built-in filter switch-over mode to ensure the camera works
properly both in the daylight and night.
IR-CUT Delay:
Set the IR-CUT switching time delay.
Lens Flip/Angle Flip:
Check to enable automatic lens flip and/or angle flip.
Angle Trad:
Set the flip angle.
Back Light:
Enable this feature to compensate the darkness of the subject when shooting against
bright light sources. For example, sunlight.
BLC Level:
Set the backlight compensation level.
3D Noise Reduction:
Enable this feature to digitally minimize video noise and extend the DVR
storage.
Level:
Set the noise reduction level.
WDR
(Wide Dynamic Range): Enable to allow automatically adjust the brightness and contrast of
the video when shooting in the darkness with bright light sources.
Level:
Set the WDR level.
AGC
(Automatic Gain Control): Configure when shooting in changing lightning environments. The
video image is brightened in dark areas.
White Balance:
Choose the white balance level between Auto (automatic adjustment), Manual
(manual adjustment of red and blue gain), indoor (optimized according to the indoor environment).
Red/Green/Blue:
Adjust the red/green/blue value.
Shutter:
Set the shutter mode.
