Digitalstream DHR8202U, Руководство пользователя

Страница: 17 / 64

Touch Panel and VFD Display
This product can be controlled by using the touch buttons on the front panel. When your product is active and you
touch the LED indicators, the product responds as by changing the whole LEDs’ colour into yellow and turning
back to red.
Touch Panel
When the product is in stand-by mode, you can switch back to active mode by touching the STANDBY icon
on the front. And then when the product is back to active mode, the backlight of the buttons will turn on indicating
full operation on the touch buttons.
15
There are two stand-by modes(Normal and Power-saving stand-by) used in this product.
1. Normal stand-by mode: The normal stand-by mode supports current time display on the VFD while on stand-by
mode. And the power supply for the main core is enabled when the product is in stand-by mode.
2. Power saving stand-by mode: The power saving stand-by mode does not support time display on the VFD
while on stand-by mode. The power supply for main core is disabled when the product is in stand-by mode.
Please be aware that the STANDBY icon and the remote control is always operable on both stand-by modes.
You can change the settings for the stand-by modes on Preferences > Power Management > Power Saving
Mode in Standby . For more information on setting your stand-by mode, please refer to Preferences > Power
Management chapter.