To enable alias programming with either Telnet or RS232 check the
enable
button for both
Telnet
Alias Programming
and
RS232 Alias Programming
and click
Apply.
Using this setting will allow you to use the alias names assigned to DigitalinxIP devices that were
established in the Digi IP Configurator software. If you choose not to use alias names and prefer to
use the default identifier for each device check the disable button and click
Apply
.
To establish a password for Telnet communication, enter the password in the
Telnet
field and click
Save
.
To enable SSH service for the IPEXCB, check the
enable
box in the
SSH Service
section and click
Apply
.
To disable SSH service for the IPEXCB, check the disable box in the
SSH Service
section and click
Apply
.
API and Security Settings
