SCENE1, SCENE2
and
SCENE3
submenus allows you to build and save pre-set scenes that
routes video from encoders to decoders in a particular order.
These adjustments are not
made in real time unless
Auto apply
box is checked.
To apply the scene to the system click
APPLY
API telnet commands can be sent to the DigitalinxIP system from the web GUI under the
SCENES, TX/RX SETTINGS and CONTROLLER SETTINGS
menu tab. This is a useful tool to
determine if telnet commands sent to the system invokes the appropriate system response.
An API command log is also available to monitor system responses which can be turned ON
or OFF. If you want a comprehensive list of telnet and serial commands please refer to the
DigitalinxIP Programming Guide
which can be downloaded from the IPEXCB product page
under the
DOCUMENTATION
tab online at www.libav.com
To test a command enter the command into the blank form under
Telnet API Command
and
click
Apply
.
Testing Telnet API Commands
