The login window for the web GUI will then appear, enter in the user name and password for the portal and
click LOGIN.
The default user name and password is admin
After logging into the web GUI, you will notice three tabs located at the top left of the page
labeled;
SCENES, TX/RX SETTINGS and CONTROLLER SETTINGS
SCENES;
allows you to route encoders to decoders, save up to three matrix scenes and test
API commands.
TX/RX SETTINGS;
allows you to change IP addresses of individual encoders and decoders on
the DigitalinxIP system as well as test API commands
CONTROLLER SETTINGS;
allows you to change the default IP addresses of the LAN1 (AV/
PoE) and LAN2 (CTRL) ports of the IPEXCB. You can also load system configurations, setup
security access, change passwords for admin login, establish user name and password for
up to 5 users, upgrade software version and test API commands.
