To route video from one TX to ALL RX’s, click on the desired
ALL RXs
cell located underneath
the TX of choice. All cells underneath the TX will turn solid green indicating that video is
successfully being routed to all decoders.
The
MATRIX
submenu allows you to route video signals from encoders to decoders in real
time using a simple spread sheet layout.
Encoders (transmitters) are labeled as
TX
and located on the top row, decoders (receivers)
are labeled as
RX
and located to far left column. Simply use your mouse and click on the
appropriate cell that links the desired TX source to the desired RX location. Once your
selection is made and video is successfully routed to the desired decoder, the cell will turn
solid green. To remove that video source from the decoder, click the cell again and the cell
will go blank indicating no video is present at that decoder location.
NOTE
:
If video is not successfully routed to the decoder location or the decoder is offline,
the cell selected will turn solid RED.
