manualshive.com logo in svg
background image

RB-60 Quick Start Guide

Read and understand all literature. Literature contains 
specifications and information for safety, operation, 
maintenance, storage and assembly specific to this 
product. Scan QR code or visit www.echo-usa.com for 
more information including full operator’s manual.

Carefully read these instructions before use. Improper use or failure to follow instructions can 

result in product failure or injuries. For safe use of this product you must read and follow all 

instructions before using. 

Cancer and Reproductive Harm
www
.P65Warnings.ca.gov

Do not allow anyone to operate the broadcast spreader without proper instructions.

Do not permit children to operate the broadcast spreader.

Wear protective eyewear and gloves when handling and applying lawn and garden
chemicals.

Read and follow the chemical label instructions and warnings for handling and applying
the chemicals you plan to spread – application settings provided are only a guideline.

Assembly

 

1.

Align holes in top handle bracket (A) with holes in bottom handle
bracket (B).

2.

Secure handle brackets with wing nuts (C) and carriage bolts (D) on
each side.

Note: 

Attach each side loosely before tightening brackets securely. 

As

sure control cable (E) is routed behind handle brackets.

 

Application Instructions

TIP HAZARD. Unit can tip on uneven ground. Always fill hopper on flat 

ground, and keep bystanders away. Otherwise personal injury could 

result

.

1.

Fill Hopper
Release actuator handle (A) to close gate. Fill hopper. 

Note: Fill hopper in an area that won’t be damaged by spilled product. 

2.

Set Gate Adjustment
Push gate adjuster (B) down and move to best application setting (see 
chart ). Pull adjuster upward to lock in place.

Note: Gate adjustment settings should only be used as a general guideline 

for application. Refer to instructions on material you are spreading 
for most accurate application setting requirements. 

3.

Application

A. Lower edge guard (C) and make perimeter pass to protect non-lawn 
areas. Pull actuator handle to open gate while spreading. 

B. Raise edge guard. Make parallel internal passes to ensure even 
coverage.

Maintenance

Avoid spraying gear case directly, and do not use a pressure washer on spreader. 

1.

Wash spreader with a garden hose after each use.

 A

B

E

C

D

A

B

C

C

Setting
Ajuste
Réglage

5

5

5

5.5

5.5

5.5

6

6

6

Setting comparison chart

 

/ Cuadro comparativo / Régler selon la charte de comparaison

Setting by granular size / Ajuste por tamaño granular

 

/ Régler selon la taille des granules

Pesticide
Pesticidas

Weed Control 
Control de hierba
Contrôle des mauvais 

herbes

Fertilizer
Fertilizante
Fertilisation

Overseeding 
Resiembra
Sursemer

New lawn 
Nuevo césped
Pelouses neuves

2 - 2.5

3 - 3.5

4 - 5.5

9 - 15

6 - 8

©2019 Echo Incorporated  

  X715784000

1

Recommended Tire Pressure: 15 psi

Do not exceed 30 psi MAX pressure rating

Отзывы: