D-FORCE1400VA SLIDING GATE OPERATOR
Remove the cover of the release.
Fit the supplied release key in the lock.
Turn the release key 2-3 circles clockwise unlock the output gear.
Open and close the gate manually.
Note: If the gate bumps the mounting post and cannot be electric opened,
move the gate a few inches by hand, thus you can release the gate with the
key, open and close the gate manually.
Fig.7
6. Wire Connecting
Make sure that the power is OFF before making any electrical connections.
Remove the cover, perform the wiring (See Fig.8 and wiring notes for
control board) and replace the cover again.
10
