DIGITALas D-FORCE1400VA, Руководство пользователя

Страница: 2 / 23

D-FORCE1400VA SLIDING GATE OPERATOR
1. Products introduction
Please read the instructions carefully before proceeding.
MCU is supplied to control the gate operator.
Keypad / single button interface.
Have Infrared safety sensor interface.
Soft start and soft stop function and the soft stop width are adjustable.
Working time is adjustable.
Motor output torque is adjustable.
User can select Auto-close function.
Manual key release designed for emergency purposes.
2. Important safety information
Carefully read and follow all safety precautions and warning before
attempting to install and use this automatic gate operator.
 The gate operator should be installed by a qualified technician;
otherwise, serious personal injury or property damage may occur.
 When opening or closing the gate, do not attempt to walk or drive
through the gate.
 If enable the auto-close function, must use the infrared sensor.
 Children should not be allowed to play near or operate automatic
gates.
 The automatic gate operator must be grounded.
 Install the gate operator on the inside of the property; DO NOT install
it on the outside of the property where the public has access to it.
 Be careful when in close proximity to moving parts where hands or
fingers could be pinched.
 Do not allow control devices to be placed so that a person can access
them by reaching through the gate.
 In the event of power failure, an emergency release key allows you to
2