Net-2000™ Voice Codec Unit
User’s Manual
Page 13
Section 3 – Net-2000™ VCU Control
DVSI Confidential Proprietary
Target IP Address
The Net-2000™- P25 VCU can communication with another NET-2000™-P25. To communicate
(encode and decode to / from) to another Net-2000™ VCU via Ethernet first select the target IP
address radio button. Next enter the IP address or host name of the remote unit you are connecting
to, in the address box located under the Radio Button. This selection also enables VOIP mode on
the VCU.
File Mode
This selection enables File Mode on the VCU. The Voice Source menu is ignored.
Control Buttons
The Net-2000™ VCU home page provides five buttons for selection of additional settings and
information.
Info Section
Selecting the Info Page will display a pop-up window with the current software version of the Net-
2000™- P25 VCU. There are no user definable settings on this page. Selecting CLOSE will close
the pop-up screen.
Figure 11 Software Version Information Pop-up Window
Network Settings
Selecting the Network Setting button will display a pop-up window with the current network and I/O
gain information of the Net-2000™- P25 VCU. There only user definable settings on this page are
Port number and Gain I/O. Selecting CLOSE will close the pop-up screen.
Figure 10 Home Page Information Button
Содержание Net-2000-P25
Страница 48: ...Page 40 DVSI Confidential Proprietary NOTES...