Net-2000™ Voice Codec Unit
User’s Manual
Page 10
Section 3 – Net-2000™ VCU Control
DVSI Confidential Proprietary
Net-2000™ -P25 VCU Status
The Net-2000™ -P25 VCU Status window is designed to conveniently display the current conditions
for Audio I/O, vocoder and communications channel to the operator. The light blue portion of the
window gives the operator a quick view of all the parameters for the transmission of the encoded
speech. The darker blue section provides information from the incoming voice source.
The top two lines of the NET-2000™- P25 VCU status screen indicate the current running condition.
Figure 6 Net-2000™-P25 Status Information
Net-2000™ is Active / Idle
The Net-2000™ VCU is active when the unit is processing data through the encoder or decoder.
The Net-2000™ VCU is idle when the unit is stopped. In this condition the unit is not ready to
process data through the encoder or decoder.
VOIP Mode
VOIP mode indicates that the Net-2000™ VCU is in Target IP address communications mode and
sending data over the Ethernet interface. VOIP mode is also displayed when Loopback
communications mode is selected because the Net-2000™ VCU sends data over the internal
loopback Ethernet address of 127.0.0.1
FILE Mode
FILE mode indicates that the Net-2000™ VCU is waiting to receive voice or data packets over the
Ethernet interface and encoder or decode them, respectively. The Ethernet address of the target is
set to 0.0.0.0 to indicate that it should be ignored and the voice source is displayed as “Ethernet”.
Voice Source
The Voice Source menu provides the user the choice to select which input source will be used on
the Net-2000™- P25 VCU in VOIP Mode only. The default source is set to 4-wire. Only one source
may be selected at a time. After switching from one voice source to the other it is necessary to
select the start button in order to initiate the change. Note that in File Mode this menu is ignored.
Содержание Net-2000-P25
Страница 48: ...Page 40 DVSI Confidential Proprietary NOTES...