Digital Voice Systems Net-2000-P25, Руководство пользователя

Страница: 17 / 48

Net-2000™ Voice Codec Unit
User’s Manual
Page 9
Section 3 – Net-2000™ VCU Control
DVSI Confidential Proprietary
Use the -i -m -g -n and -d options to set up a static IP address. The argument following the -i -m -g
and -n options should in the form of a dotted IP address (e.g. “192.168.0.1"). If a DHCP server
becomes available at a later time, it can be enabled by issuing the network command with the -dhcp
option.
After setting or changing the network settings, the VCU should be rebooted by typing “shutdown" at
the console terminal adsh> prompt.
adsh>shutdown
Net-2000™- P25 VCU Web Control Interface
Home Page
The Net-2000™- P25 VCU can be controlled remotely by accessing the unit’s built-in web server
using a PC's web browser as the graphical user interface. To connect to the Net-2000™ VCU web
server home page, first open up the web browser software on a PC and type the IP address (or
hostname if the LAN has a name server) of the VCU you want to control in the URL address bar.
The VCU web server will respond with a Welcome Page. Select the “Click Here to Continue” and
you will go to the VCU Home Page as shown in Figure 1.
Figure 5 Net-2000™- P25 VCU Home Page
The Net-2000™- P25 VCU’s built-in web server provides I/O configuration, system control and
displays information about the operational mode and network settings. The left portion of the page
is where the system settings are selected. The right side of the page displays the current system
and connection settings.