Net-2000™ Voice Codec Unit
User’s Manual
Page 3
DVSI Confidential Proprietary
Section 2 – Net-2000™ VCU Installation
Net-2000
TM
- P25 VCU Installation
Overview
The Net-2000™- P25 VCU hosts a variety of inputs and outputs that provide you with flexibility in
system integration. The Net-2000™- P25 VCU is designed to be controlled through the use of a PC
and to communicate over an Ethernet network. This manual assumes that the user has a working
networked PC before the Net-2000™- P25 VCU is installed.
Net-2000™- P25 VCU Connections
See Section 5 Specifications for more detailed technical information about each of the connections.
Figure 1 Net-2000™- P25 VCU Rear Panel
Rear Panel Connections
Item No. Name
Connector Type
Status
1
Serial Port
DE9s
Active
2
LAN
RJ-45
Active
3
RS-422 Synchronous
DB-15HD
Not Active
4
RS-422 Asynchronous
RJ-45
Not Active
5
2 Wire I/O
RJ-11
Not Active
6
Analog Line In
RCA Jack
Active
7
Analog Line Out
RCA Jack
Active
8
Handset
RJ-11
Active
9
No Connection
SMA
Not Active
10
AC Line In
Power Cord Receptacle
Active
Table 1 Rear Panel Connectors
In order to install the Net-2000™- P25 VCU connections must be made to a voice audio source and
output, channel communications and control. In Target IP Mode, the Net-2000™- P25 VCU can be
connected to another Net-2000™- P25 VCU located anywhere on the LAN. This configuration can
support a real-time, full-duplex channel over Ethernet connection. This mode can be controlled via
the built-in web page.
Содержание Net-2000-P25
Страница 48: ...Page 40 DVSI Confidential Proprietary NOTES...
