Digital Projection LIGHTNING 30/40/45-1080p, Руководство пользователя

Страница: 83 / 168

Rev B. January 2010 Page 4.31
Digital Projection
LIGHTNING 1080p, 1080p 3D/UC
User Manual 4. Controlling the projector
For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Notes
Read the notes on Colour and
Global Colourimetry earlier
in this section before making
any settings in the Colour
menus.
Note that any changes made
in the Global Colourimetry
menu (see Setup Menu, later
in this section) will affect ALL
inputs, modes and presets for
which Global Mode has been
selected in the Colour menu .
The Colour Temperature
slider is available only if
Temperature Mode is selected.
The
RGB Lift and Gain sliders
are available only if User Mode
is selected.
The Component Type
selection is available for RGB1
and Component inputs only.
Colour Mode
Press and to select Colour Mode.
Press and to select from:
Global
Temperature
User
Peak
Video
Film
Graphic
ColorMAX User 1
ColorMAX User 2
Colour Temperature
Press and to select Temperature.
Press and to adjust the slider (3,000K to 10,000K. in 100 steps).
RGB Lift
Press and to select the parameter to be adjusted.
Press and to adjust the slider.
RGB Gain
Press and to select the parameter to be adjusted.
Press and to adjust the slider.
Component Type
Press and to select Component Type.
Press and to select from:
RGB
YPrPb
•
•
•
•
•
Colour menu continued