Digital Projection
E-Vision 6500 Series
A Tour Of The Menus
Operating Guide
Page 39
Rev D July 2014
Advance Setting submenu
Security Lock
•
When the Security Lock is enabled, a security
Password
will need to entered before the
projector can be used, or before the lock can be
Disabled
.
•
When setting the lock for the first time, the
Password
will need to be entered twice, to
ensure that it has been entered correctly.
Keypad Lock
•
To
lock
the control panel keys, use
or
to move the green highlight to
YES
or
NO
, then press
ENTER
to confirm your selection.
•
To
unlock
the keys, press
and hold for 5 seconds.
Image Capture
•
To capture the current screen image for use as the
Custom
background, use
Save Image
. This will take approximately 2 minutes.
•
To delete the currently saved image, use
Delete
.
Wall Color
•
Set this to suit the projection screen.
Digital Zoom
•
Enlarge a section of the image.
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
Setup Menu
Advance Setting Submenu
The
Password
is made of a
combination of five presses on the
,
,
and
keys.
Image Capture is available only:
- for Component, Computer 1,
Computer 2 and Computer 3 inputs;
- when Aspect Ratio is set to
Normal
;
- for native resolution images:
(1280x800 for E-Vision WXGA,
1024x768 for E-Vision XGA)
There are two storage locations: one
for the 4 segment color wheel and
one for 6 segment color wheel.
If you change wheels you will need
to recapture the image. If you
change back, the image for the first
wheel will still be in memory.
MENU = END
|
SEL/ADJ.
|
SEL.
Setup
Video
Installation
Signal
Picture
Security Lock
Keypad Lock
Image Capture
Wall Color
Digital Zoom
Advance Setting
Off
0
Disable
Messaging
On
Setup menu
continued
