Digital Projection
E-Vision 6500 Series
A Tour Of The Menus
Operating Guide
Page 36
Rev D July 2014
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
Overscan is used to compensate for
noisy or badly defined image edges,
by increasing the size of the image,
to force the edges off-screen.
It is always
On
for the Video and
S-Video inputs, and for 480i and
576i signals.
The Video System setting is
available only for signals on the
Video and S-Video inputs.
The Video Setup setting is
available only for 480i signals on
the Computer 1, Computer 2 and
Component inputs, and NTSC3.58
signals on the Video and S-Video
inputs.
Closed Captions are recognised
only with NTSC3.58 signals on the
Video and S-Video inputs.
Video menu
Overscan
•
Set this to
On
or
Off
as required.
Video System
•
Set this to
Auto
, unless the projector has problems selecting between
PAL
,
SECAM
,
NTSC4.43
,
NTSC3.58
,
PAL-M
,
PAL-N
and
PAL-60
.
Video Setup
•
Set this to
0IRE
or
7.5IRE
as required.
Closed Caption
•
Set this to
Off
or
CC1
as required.
