Digital Monitoring Products SecureCom Smart Z-5010T, Инструкция по установке и программированию

Страница: 6 / 40

2 Z-5010T Installation and Programming Guide | Digital Monitoring Products, Inc.
What is Included
• One Z-5010T Z-Wave Thermostat
• Hardware Pack
• One Sheet of Adhesive Wire Labels
• Four AA Batteries
Power Options
Warning:
Do not use this thermostat for line voltage controls rated at 120/240 VAC.
Doing so may result in equipment damage or injury.
The thermostat can be powered by either 24 VAC or four AA batteries. Do not attempt to
power the thermostat with both 24 VAC power and batteries. Batteries are not required
for backup.
Powering the thermostat with 24 VAC power requires both the C (common) wire and the
R (return wire). If there is no C and R wire, batteries are required.
The thermostat will operate for approximately two years on four AA alkaline batteries
depending on the frequency of user operations and backlight operation. Do not mix
different types of batteries. Do not mix old and new batteries. Dispose of used batteries
properly.
If the thermostat is installed on a Z-Wave network with battery power, it will not work as
a Z-Wave repeater. Do not install batteries and temporarily power the thermostat from
24 VAC to add it to a Z-Wave network or shortened battery life may occur when wired
power is removed.