Digital Monitoring Products SecureCom Smart Z-5010T, Инструкция по установке и программированию

Страница: 17 / 40

Digital Monitoring Products, Inc. | Z-5010T Installation and Programming Guide 13
PROGRAM THE THERMOSTAT
To enter Menu mode and navigate through the menu items, complete the following steps.
Note: When the backlight is off, the first press of any button turns the backlight on
but does not initiate any action.
1. Press and hold the FAN button to enter Menu mode.
2. Press the

buttons to scroll through the menu items.
3. Press the key next to SELECT to change a setting.
4. The current setting for that selection flashes. Change settings with the

buttons, then press the key next to SELECT to save it.
5. To exit, press the key next to DONE .
To select Menu
Mode, press and
hold the fan
button until the
setup screen
displays.
MODE
FAN
72H 80c
Off
Auto
F
Figure 11: Entering Menu Mode
MODE
FAN
Select
Done
SETUP
To enter the menu,
press the key next
to
SELECT
.
To return to the
main screen, press
the key next
to DONE .
Menu choices
appear in the
status display
Use the Up and
Down Arrow
buttons to move
to menu items.
Figure 12: Navigating the Menu