Digital Monitoring Products SecureCom Smart Z-5010T, Инструкция по установке и программированию

Страница: 19 / 40

Digital Monitoring Products, Inc. | Z-5010T Installation and Programming Guide 15
Setup
Configure user preference settings.
• FAHRENHEIT OR CELSIUS Select temperature units for
the thermostat.
• BACKLIGHT TIMEOUT Choose how long the
backlight stays on after the last button press. Range
is 10 - 30 seconds.
• SENSOR CALIBRATION Change the temperature
calibration by ±7 °.
• STATUS LINE Configure the status line to display either
setpoints or the clock.
System
Setup the thermostat for a specific HVAC system type.
• SYSTEM TYPE Select either a standard or heat pump
system type.
• FAN TYPE (Standard only) Select gas or electric fan
type. Applies only to standard systems.
•
CHANGEOVER
Select whether changeover occurs with
cool (O) or with heat (B). Applies only to heat pump
systems. If the opposite of the desired action occurs,
choose the opposite changeover action.
SETUP
SYSTEM