23
Additional Safety Recommendations:
A toggle switch is suggested to be installed as shown in Figure B, therefore the
remote start function can be disable when necessary. For example, the vehicle
is in the servicing, or parks in an enclosed or partially enclosed area without
ventilation.
In some vehicles, the PARK/NEUTRAL position switch activates a factory
starter lock out that will not allow the starter to operate in a drive gear. In these
vehicles, connect this wire to chassis ground. Or connect this wire to a toggle
switch as shown in Figure C. Connect the other wire from the toggle switch to
chassis ground.
Figure B
Figure C
With the type of vehicles that do not have interface of the neutral safety switch,
connect this wire as shown in Figure C.
IMPORTANT! Always perform a Vehicle Safety Check to verify that the
vehicle cannot be started in ANY drive gear and that the override switch is
functioning properly.
Содержание 2GO KEYLESS iKEY RS
