Digital Guard Dawg 2GO KEYLESS iKEY RS, Инструкция по установке и эксплуатации

Страница: 18 / 36

18
Newer Vehicles with Factory Immobilizers or Multiplex Wiring.
2GO Keyless™ can be installed on virtually any new vehicle and add the
Convenience & Security of keyless operation. 2GO Keyless™ will integrate with
even the most sophisticated vehicle electrical systems and will provide
completely keyless operation similar to systems found on the today’s most
prestigious vehicles.
As discussed earlier in
“Section 2”,
Installations of vehicles manufactured
after 1995 may require an additional
Immobilizer bypass module
due to
existing factory security systems or vehicles manufactured after 2000 may need
a
Data Interfaces
. These modules will allow 2GO Keyless™ to work properly in
conjunction with factory security or vehicle data systems. If needed, the correct
module for your vehicle should be available at any qualified Alarm shop. The
two major manufactures of these modules are DEI – “Express” , or iData.
Locking Steering Columns
For almost 30 years now vehicles have had one or another type of “Locking
Steering Column” system. These range in design from mechanical to electronic,
simple to involved to bypass.
There are two basic approaches:
First, determine which type of Locking mechanism you have: Mechanical or
Electronic.
If you have an
“Electronic”
lock it will simply be a matter making an additional
connection during installation that supplies the correct unlock signal to the lock
solenoid at the time the vehicle is started.
If you have a “Mechanical” lock there are two methods.
If you have a “
Mechanical”
lock: All Mechanical steering column locks can be
removed. But in many cases this requires partial disassembly of the vehicles
steering column. If your installation goals include completely removing the column
lock, one of the best sources for information on this is a qualified body shop; they
remove and replace column locks frequently as a matter of repairing attempted auto
thefts.