Digital Guard Dawg 2GO KEYLESS iKEY RS, Инструкция по установке и эксплуатации

Страница: 32 / 36

32
The iKey
™
Replacing the battery:
Use CR2032 lithium disk battery available at most drug stores.
Make sure the battery is inserted with the correct polarity.
Be extremely careful not to bend the battery contacts when inserting
the new battery. Before inserting the new battery, slightly push the battery contacts towards
each other to ensure that that good contact is made with the new battery. Replace battery
with dry hands and ensure there is no debris in the battery compartment. Also, avoid touching
or removing any part in the exposed iKey™.
Other important information about your iKey™:
~Contact with Metal will interfere with your iKeys™ ability to communicate properly
with the control module.
~Placing your iKey™ in a pocket behind or next to a cell phone or Keys will interfere
with the units ability to communicate and you may notice shorted read range.
~Do not apply any metal stickers or attach metal objects to your iKey™
~Do not leave the iKey™ in high temperature for extended periods of time, such as on
the vehicle dash or hood.
~Do not expose or submerge the iKey™ in water.
~Do not leave the iKey™ in close proximity to electromagnetic devices such as cell
phones or microwaves.
~Do not attach your iKey™ directly to a metal key ring.
~To attach to a key ring use the strap provided and
attach as shown here.
~ VERY IMPORTANT: To save the power of vehicle
battery, if the vehicle has not been used for 7 days, the
systems will quite scanning for the iKey™ and
The unit is awakened by seeing a signal from the GREEN “NEGITIVE DOOR TRIGGER”
WIRE. THIS WIRE MUST BE HOOKED UPDURING INSTALLATION.