Digital Equipment VNswitch 900FF, Руководство по установке и настройке

Страница: 75 / 100

Configuring the Module in a DIGITAL MultiSwitch 900 6-11
[4] Configure IP
[2] Set In-Band Interface IP Address
This option prompts you to change or enter the module’s in-band IP address, subnet
mask, and default gateway for the in-band interface. If an IP address was previously
configured, the screen displays an in-band IP address. The factory default setting is no
in-band address.
You do not need to configure the module with a subnet mask for SNMP
communications with management stations located on the same subnet as the module.
The following example shows the dialog associated with this option:
================================================================
IN-BAND INTERFACE IP ADDRESS CONFIGURATION
example: 16.20.40.156
Interface IP Address Subnet Mask Other Info
In-Band 16.20.216.91 255.255.255.0 08-00-2B-A3-CD-08
OBM Port 16.20.66.156 255.255.255.0 Speed 9600 bps
Enter the IP address [16.20.126.24] : 16.20.54.156 <Return>
Enter the Subnet Mask [255.0.0.0] : 255.255.0 0 : <Return>
Press Return for IP Configuration Menu...
Format: The standard 4 octet dotted decimal notation in which
octet of the address is represented as a decimal
by a ’.’ character.
each
value, separated
================================================================
VNswitch 900FF - slot 3
To delete the IP address, enter 0 in the appropriate
address field.