Digital Equipment VNswitch 900FF, Руководство по установке и настройке

Страница: 43 / 100

Installing the DIGITAL VNswitch 900FF 3-11
How to Install the Module
Task 4: Connect the LDM Port Cable
To perform a remote load/dump/management operation, the LDM cable must be
connected to the LDM port. The LDM port uses straight-through 10BaseT, 8-pin MJ
port connectors for Ethernet.
To connect the LDM cable to the LDM port, complete the following steps:
Figure 3-5: LDM Port Cable Connection
Step Action
1
Align the release tab on the cable plug (1), with the keyway on the
module’s 10BaseT port connector.
2 Insert the plug into the connector (2), ensuring that the release tab snaps
into the locked position.
NPB-0832-97F
VNswitch 900XA
Fast Ethernet/A
TM
B/S
A/M
1
2