Digital Equipment VNswitch 900FF, Руководство по установке и настройке

Страница: 40 / 100

How to Install the Module
3-8 Installing the DIGITAL VNswitch 900FF
How to Install the Module
The hot-swap feature allows you to install the module into the DIGITAL MultiSwitch
900 without turning off power. Seating the module initiates the power-up sequence.
To install the module, complete the following tasks.
Task 1: Compare the Power Ratings
Compare the module’s power requirements (1) with the values shown in the Chassis
Manager (2) status display (Figure 3-3).
If any of the module’s power requirements exceed the values shown in the status
display, add another power supply (see the DIGITAL MultiSwitch 900 Owner’s
Manual).
Figure 3-3: Sample Power Ratings
2
NPB-0831-97F
1
31.8 W
4.8 A 5 V
0.0 A 15 V
0.65 A 12 V
Available: 90.5 W
5V: 13.0 A, 15V: 3.5 A