Digital Equipment VAX 4000 108, Информация пользователя

Страница: 94 / 243

Installing Hardware Options
3–12 VAX 4000 Model 108 User Information
4. Remove the EMI shield (Figure 3-7
š) covering the slot you are filling by pushing it
out from the inside of the enclosure.
5. Attach the drive rail
› onto the device (or onto the mounted bracket if you are
installing a 3.5-inch device) using the two screws provided.
6. Insert the device
™ through the front of the bay and slide it rearward in the bay so that
the cable connectors are inside the enclosure, engaging the bay tabs onto the drive rail.
If you are installing a non-removable media device (such as a disk drive) seat it so that
the front is flush with the front of the enclosure; seat removable media devices (such
as a CD-ROM) so that the front will be even with the front of the bezel after it is
reinstalled.
7. Insert the screws
œ through the side of the bay and into the device as shown. There
are two or four screws provided, depending on the particular device It may be
necessary to adjust the position of the rail slightly to seat it in the system.
MLO-013719
1
2
3
4
Figure 3-7 Installing Optional Devices in the Front Bay