Digital Equipment VAX 4000 108, Информация пользователя

Страница: 220 / 243

Programming Parameters for DSSI Devices
E-10 VAX 4000 Model 108 User Information
Parameter Current Default Type Radix
--------- ---------------- ---------------- -------- -----
SYSTEMID 1402193310841 0000000000000 Quadword Hex B
Exiting the DUP Server Utility
After you have completed setting and examining DSSI device parameters, enter the
WRITE
command at the
PARAMS>
prompt to save the device parameters you have
changed using the
SET
command. The changes are recorded to nonvolatile memory.
If you have changed the allocation class or node name of a device, the DUP driver utility
will ask you to initialize the controller. Answer Yes (Y) to allow the changes to be
recorded and to exit the DUP driver utility.
If you have not changed the allocation class or node name, enter the
EXIT
command at
the
PARAMS>
prompt to exit the DUP driver utility for the specified device.
This shows the procedure for saving parameter changes. The controller is initialized.
PARAMS>WRITE
Changes require controller initialization, ok? [Y/(N)]Y
Stopping DUP server...
>>>
This example shows the DSSI busses for the embedded DSSI adapters after the unit
numbers for the disk devices on bus 0 have been changed from 0, 1, and 2 to 10, 11, and
12. The bus 0 device names are now DIA10, DIA11, and DIA12.
>>>SHOW DSSI
DSSI Bus 0 Node 0 (SYSDSK)
-DIA10 (RF72)
DSSI Bus 0 Node 1 (R7EB3C)
-DIA11 (RF72)
DSSI Bus 0 Node 2 (R7EB22)
-DIA12 (RF72)
DSSI Bus 0 Node 5 (TFDR1)
-MIA5 (TU81)
DSSI Bus 0 Node 6 (*)
>>>