Digital Equipment HiNote VP 700 Series Скачать руководство пользователя страница 68

Страница: 68 / 149

System BIOS

3-9

The Hard Disk Submenu

Move the highlighted cell to this field and press <Enter> to
launch the submenu. The following settings are available in the
Hard Disk Menu.

Field

Settings

Description

Type

Auto*

1-39

None

User

Select the type of hard drive installed in
the system.

Automatically detects and configures
all parameters, except 32 Bit I/O, for
the type of hard drive installed.

Choose from 39 predefined hard drive
types.

No hard drive is installed in the system
or hard drive is of an unknown type.

Manually configure the hard drive
parameters. Consult the hard drive
documentation for more information on
making the correct settings.

*Default value.

NOTE: Auto is the recommended setting for most hard
drive types. If your hard drive is not recognized by the
system, consult the hard drive documentation for
information on the appropriate settings.

Содержание HiNote VP 700 Series






















































































































































Результаты поиска

Содержание HiNote VP 700 Series

Отзывы:

Digital Equipment HiNote VP 700 Series, Справочное руководство по обслуживанию, Страница: 68 / 149

Результаты поиска

Содержание HiNote VP 700 Series

Отзывы: