Digital Equipment HiNote VP 700 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 149

Digital Equipment HiNote VP 700 Series Скачать руководство пользователя страница 2

December 1997

The information in this document is subject to change without
notice and should not be construed as a commitment by Digital
Equipment Corporation.

Digital Equipment Corporation assumes no responsibility for any
errors that might appear in this document.

The software described in this document is furnished under a
license and may be used or copied only in accordance with the
terms of such license. No responsibility is assumed for the use
or reliability of software or equipment that is not supplied by
Digital Equipment Corporation or its affiliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S.
Government is subject to restrictions as set forth in
subparagraph (c) (1) (ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013.

DIGITAL HiNote VP 700 Series Service
Quick Reference Guide
Copyright © Digital Equipment Corporation.
All Rights Reserved.

DEC, DIGITAL, ThinWire, and the DIGITAL logo are registered
trademarks of Digital Equipment Corporation
Intel and Pentium are registered trademarks of Intel Corporation
Microsoft, MS-DOS, and Windows are registered trademarks of
Microsoft Corporation.

All other trademarks and registered trademarks are the property
of their respective holders.

«
1
2
3
4
...
»

Содержание HiNote VP 700 Series






















































































































































Отзывы:

Нет отзывов