Digital Equipment HiNote VP 700 Series, Справочное руководство по обслуживанию, Страница: 55 / 149

System Restoration
2-14
5. Setup will inform you that it is going to detect all mass
storage devices, press [Enter] to continue.
6. Setup will search for all mass storage devices then list
the storage device that were recognized by the system.
Press [Enter] to continue.
7. When prompted that you must insert the Emergency
Repair Disk, press [Enter].
8. Insert the Emergency Repair Disk into the Floppy Disk
Drive and press [Enter].
9. Windows will then inform you that it will restore the
registry files for each option marked with “X”. Use the up
and down arrows to move cursor and press [Enter] to
mark the appropriate options. When finished marking
the registry options to be restored, cursor down to the
Continue option and press [Enter]. If you are not sure
which options to mark for repair, refer to the on-line help
which is activated by pressing [F1].
10. When Windows prompts you stating it has completed
making the necessary repairs, remove the Emergency
Repair Disk and Windows NT 4.0 CD, and reboot the
system.
Windows NT 4.0 System Restoration
This section details how to prepare a new or existing hard drive
for Windows NT 4.0 installation and how to install drivers and
software applications. To complete the process you must have
the DIGITAL HiNote VP 700 System CD and Windows NT CD
which were packaged with your notebook.
1. Place the Windows NT CD into the CD-ROM Drive and
boot the system. The system will boot from the
Windows NT CD and Windows NT Setup Program
interface will appear.