Digital Equipment HiNote VP 700 Series, Справочное руководство по обслуживанию, Страница: 54 / 149

System Restoration
2-13
6. When Windows is finished creating the Emergency
Repair Disk, click on [Exit].
7. Eject the Emergency Repair Disk and enable write
protection. Please refer to Chapter 7 in your User’s
Guide for tips on floppy diskette care and storage.
NOTE: The Emergency Repair Disk should be
updated after each major software or hardware
configuration change. To update the Emergency
Repair Disk, insert the disk into the Floppy Drive and
run rdisk. Then click [Update Repair Info] and follow
the on-screen instructions.
System Recovery Using an Emergency
Repair Disk
This process should only be done as a last resort when you
have exhausted all other options, such as restoring from tape
backups or accessing Last Known Configuration by holding
down the Space bar as your computer starts.
1. Place the Windows NT 4.0 CD into the CD-ROM drive.
2. Boot the system. The system will boot from the
Windows NT 4.0 CD.
3. When the Windows NT Welcome screen appears,
press [R] to select the “To repair a damaged Windows
NT version 4.0 installation” option.
4. A Windows NT Workstation Setup screen will appear
informing you that Windows will perform all tasks
indicated with an “X”. Deselect the “Verify Windows NT
System files” option, then cursor down to the Continue
option and press the [Enter] key.