manualshive.com logo in svg

Digital Equipment HiNote VP 700 Series, Справочное руководство по обслуживанию, Страница: 25 / 149

Поделиться
Скачать
Digital Equipment HiNote VP 700 Series Скачать руководство пользователя страница 25

Overview

1-15

Right Front View 

(Panel Open)

Component

Description

➊

Lid Switch

Close the notebook’s LCD lid to
suspend the system.  Open the lid and
press the Suspend/ Resume button
again to resume the normal operation.
The Lid Switch can be configured to
CRT display mode from the Power
menu of the Setup Program.  Please
refer to Chapter 2.

➋

LCD Display

DSTN or TFT XGA back-lit display.

➌

Internal Microphone

Used to record music, voice and sound
files.

➍

LCD Status Display

Provides system operating status.

➎

Suspend/Resume
Button

Turns the notebook on and toggles
between the suspend/resume mode.
Press the [fn + Suspend/Resume] to
turn off the notebook.

➏

Internal Stereo
Speakers

Used to hear sound files and system
sounds through stereo speakers.

t

Touch pad (internal
PS/2 mouse)

A touch sensitive pointing device
providing all the functions of a two-
button mouse.

Содержание HiNote VP 700 Series






















































































































































Отзывы:

Нет отзывов