Digital Equipment HiNote VP 700 Series, Справочное руководство по обслуживанию, Страница: 50 / 149

System Restoration
2-9
When running FDISK, you will be prompted whether or
not to enable large disk (FAT32) support. Choose Yes
to enable large disk (FAT32) support. Choose No to
enable FAT16. If you choose Yes to enable large disk
support (FAT32) and want to install WinNT or a WIN95
non-SR2 operating system at a later time, you will have
to repeat the Complete System Restoration procedure
and enable FAT16. Also make sure you set the Active
Partition flag to make it bootable.
3. Choose Option 3. This Option will Format your C: drive
and then create a 86016 KB Save-to-file.bin file. This
file was created by the PHDISKF Utility and enables
you to use your notebook's Save to Disk feature.
If you have over 80MB of RAM installed on your
notebook, you must use the PHDISKF utility to create a
larger Save-to-file.bin file after this process is complete.
See the section entitled RAM Increases Over 80MB
Total of this addendum for detailed instructions.
4. Insert the Windows 95 CD into the CD-ROM drive.
5. Choose Option 2 (Re-install Microsoft Windows OS)
from the Boot Floppy Main Menu. This will run
Windows SETUP program from the Windows 95 CD.
SETUP runs SCANDISK and then installs the OS.
Follow the on-screen instructions to complete Windows
95 installation.
6. Remove the Windows 95 CD and insert the DIGITAL
HiNote VP 700 System CD. Run CDInstall. Click on
the Next buttons until the Choose Desired Category
screen appears.
7. Click on the Drivers box. You should now re-install all
drivers. Some of the drivers can be automatically
executed, while some require manual installation.
Please refer to the sections earlier in this document for
information.