Digital Equipment DECserver 700-08, Руководство владельца оборудования

Страница: 21 / 77

3–1
3
Cabling the Site
This chapter shows you how to install the cables and associated devices used by the
DECserver 700.
3.1 Preinstallation Checks
Before beginning the DECserver 700 installation, use the following checklist to
make sure that the site preparation is complete:
•
Arrangements have been made to connect the DECserver 700 Ethernet port to
an Ethernet interface device (if required). For standard Ethernet, the device
can be a DELNI
TM
network concentrator or an Ethernet transceiver. For Thin-
Wire Ethernet, the device can be a DEMPR
TM
,
DESPR, or ThinWire segment.
For 10BaseT Ethernet, the device can be a DETPR.
•
The Ethernet interface device is installed and the required cabling is in place,
tested, and tagged.
•
The rack-mount kit is installed (if required) as described in the DECserver
700 Hardware Installation Card.
•
Cables of appropriate length are available for connecting the DECserver 700
to the Ethernet interface device.
•
The devices (terminals, modems, personal computers, hosts) are ready to be
connected.
•
Cables of appropriate length and type are available for connection of serial
devices.